Stainless Steel Side Bars for the Chrysler Grand Voyager.
Description
Stylish stainless steel side bars with two durable step pads for the Chrysler Grand Voyager 1997-2007 including the LE, LX, SE, XS, CRD, Limited, Executive and all Stow&Go models (They will not fit the all new 2008 model). For V6 Petrol models see notes below.
What makes them special?
These are beautifully designed side bars made from high grade
SUS304 stainless steel, the ends of these bars are beautifully capped in stainless steel, and then lovingly
Hand Polished to a mirror like finish.
They not only look good but are very practical too, with 2 durable non slip step pad inset into the top of each bar. You can stand on them to get in and out of the vehicle and they look great too whilst giving added side protection from other opening car doors.
The price is for a pair of side bars and all black powder coated brackets and fittings are included for easy DIY fitting to the existing mounting points on the chassis - no drilling is needed as all existing holes are used. Vat is included in the price and a receipt will be sent with the delivery.
Specifications
| • |
Product |
-
|
Stainless Steel Side Bars |
| • |
Code |
-
|
B060001 |
| • |
Vehicle |
- |
Chrysler Grand Voyager |
| • |
Years |
-
|
1997-2007 (They will not fit the all new 2008 model)
|
| • |
Models |
-
|
All models including the LE,LX,SE,XS,CRD,Limited,Executive and all Stow&Go models. For V6 Petrol models see notes below.
|
| • |
Material |
-
|
Hand polished high grade SUS304 stainless steel. |
| • |
Dimensions |
-
|
Length is 83 3/8 inches (2118mm)
|
| • |
Tube Diameter
|
-
|
Chunky 3 inch (76mm)
|
| • |
Drilling required?
|
-
|
No drilling needed - Option to drill two 6mm holes in the rear cill for a more robust fit of the rear brackets, (ideal for minicab drivers etc) |
| • |
Average fitting time |
-
|
1 - hour
|
| • |
Can be stood on? |
-
|
Yes |
| • |
Fittings |
-
|
All powder coated brackets are included with fixings |
| • |
Extras needed? |
-
|
Four 6mm bolts/nuts if you drill the cill. |
| • |
Notes |
-
|
On V6 petrol models the front bracket will need a slight bend putting in the
middle (DIY) so that the exhaust clears the bracket - for the diesel it
is fine. |
All black powder coated brackets and fittings are included for easy DIY fitting to the existing mounting points on the chassis - these can be fitted with no drilling as all existing holes are used.
Please note - For extra strength the rear brackets allow for securing using two 6mm bolt through the lip of the bottom cill (requires two 6mm holes to be drilled).
Click here to download fitting instructions