Make your Mitsubishi Pajero really stand out. This high quality aluminium rear door
handle is designed for the Mitsubishi Pajero. Made
from tough aluminium.
It is a high quality and stylish aluminium rear door handle, which really stands out once fitted.
Fix using 3M (Scotch) double sided tape already fixed to the back of the feet.
No tools required to fit.
The length of the handle, feet to feet, is 28 inches (711mm).
The width of the bar (including feet) is 2.5 inches (63.5mm)
The depth of the bar is roughly 2.5 inches (63.5mm).
Very hard wearing / will not rust.
Provided with 3M tape but can be fixed on with screws through the rubber back plates for extra security.
The price is one rear door handle.
Drilling is optional.
Fantastic value for your Mitsubishi Pajero, giving an excellent finishing touch..
Vat is included in the price and a receipt will be
sent with the delivery.
Instructions to
fit
- Thoroughly remove all wax and grease from the application area.
- Use 3M General Purpose Cleaner and Wax Remover or other mild solvent, such
as White Spirit applied with a clean cloth.
- Gently indirectly heat the trim cover and car bodywork using a hairdryer to
30 degrees Celsius, in order to achieve an improved instant bond.
- Remove outer covering from tape to expose sticky side.
- Apply moulding (with tape applied) to the desired area of the car body.
- Firmly buff down after applying.
- Allow at least 12 hours before testing bond.
The rear door handle can also be fixed on with screws through the rubber back plates.