This amazing stainless steel roll bar is for the Nissan Navara D40 2006 onwards.
It will fit single, extra cab and double cab models,but please check the dimensions below against your vehicle as the bedheight is different on each variant. Constructed from only the finest materials this roll bar is built to last!
The bar bolts to the top of the pick up bed sides.
Does not take up any valuable load bed space.
Drilling is required.
Chunky 1540mm (61 inch) diameter, mandrel
bent, stainless steel tube.
The height is 515mm (20 inches).
The depth is 800mm (32 inches).
SUS304 grade stainless steel tube.
Hand polished brilliant mirror like finish.
This is perfect for if your Navara D40 has the roller shutter top as the mounting points finish on the shutter edge. Or you can attach the roll bar by fitting a flat bracket with a 90 degree bend to the bed sides (this bracket is not supplied).
The price includes the roll bar and all the fittings and brackets foreasy bolt through fitting to the top of the pick-up bed sides (extra brackets need to fix the roll bar to a roller shutter or the 90 degree bracket are not supplied).
Vat is included in the price and a receipt will be sent with the delivery.
This roll bar is about 1-2 inches too short for the rear bed top, and
thus hangs over the inside ledge a little. Therefore in order to fit
this you would need to remove the bed liner first, line up the bar and
mark the area to drill/ add brackets to. Then attach 2x 45 degree,
angled brackets to the inside of the bed top,
this would enable the 'leg' section of the bar to sit slightly over the
inside ledge. You then need to refit the bed liner (if you have one)
with holes cut out where the angle bracket would stick out.
Once the liner is back on and the angle bracket is sticking out, you can then attach the roll bar to this.
Please note: The roll bar does not come with any angle brackets, you will need to source yourself from most hardware stores
If you have a roller shutter cover, the roll bar will fit to the outer
cover of the shutter without having to use the angle brackets.